Wireless temperature sensor - MIDAM W10009
Wireless, battery powered temperature sensor. Native modbus map grants seamless integration into the DDC/SCADA system. The communication is based on the AES128 encrypted Midam KFP protocol, which allows to update the device firmware on a wireless basis. IP65 protection level ensures reliable function of the sensor even in harsh environment.
- Temperature sensor
- SCADA system integration
- Battery-powered
- Wireless
- Ingress protection rating IP65
- Stainless steel design of the measuring part
Function
The wireless temperature sensor W10009 measures temperature in non-aggressive environments using the probe situated outside the device body. The values are transmitted through the 868 MHz unlicensed band to the WCOM51, or WCOM01 gateways. Embedded AES 128-bit, provides the most secure encryption standard for wireless connections. The device has factory-set values to ensure the correct default function and allows direct reading and writing of values to the Modbus map, which is available in a separate document. All settings are also stored in the Modbus map directly in the device. Before using the device for the first time, it is necessary to pair it and it is recommended to perform individual configuration, especially to change the encryption password.
Application
- HVAC control
- Measurement of temperature
- Wireless integration into SCADA control systems
Midam KFP pairing
Two devices are required for mutual communication. Both must be powered and located in close proximity to each other. Usually, wireless gateway or configuration dongle is used to set up remote wireless devices. Use look-up function in software tool to display a list of all available devices in range and assign or adjust parameters based on wireless ID code for each single device. There is a comprehensive help section integrated in the software tool to provide support during the wireless device set up procedure.
SCADA system integration
The sensor can be integrated into DDC or SCADA systems directly via the WCOM51, or WCOM01 wireless gateways.
Midam KFP Password change
The encryption password (default “MIKROKLIMA1234AB”) and the communication frequency (default 868.95 MHz) can be changed using the WUSB01 configuration dongle and appropriate software tool.